Spooktacular 2007 registration now open!

[urtoslo]

Use this link to get your registration form!

http://www.nvcorvetteclub.com/nvcc/spook/index.jsp

Workers, please notify me of your availability! Corner workers, specialty chiefs, CALL ME CALL ME CALL ME!

[LilRedCorvette]

I'll be there come hell or high water, in one car or another. Shooting for the '89 to be finished for it. Heh.

[urtoslo]

Shooting for the '89 to be finished for it. Heh.


WooHooo! [:D]

[kedvesh]

Maybe I can make it this year...if they don't deploy me again. [:D]

[jbeaupre]

Andrej,
Check went out today! [:D]

[jbeaupre]

OH and wife is willing to help with Reg. or whatever but not trained to be corner worker!

[PAZ06]

Sorry if I should know this, but what track is this held on.
Thanks

[urtoslo]

Sorry if I should know this, but what track is this held on.
Thanks


It's held on Jefferson Circuit at Summit Point. We run clockwise on Sat and counter clockwise on Sun.

[MungoZ06]

It's held on Jefferson Circuit at Summit Point. We run clockwise on Sat and counter clockwise on Sun.
Mailed my $ last week. [:>]
Yeah ... gotta watch the last turn running CCW Sunday ...
Some have overcooked it and "discovered" the rocks behind the weeds on the inside ... [:-s]

[urtoslo]

OH and wife is willing to help with Reg. or whatever but not trained to be corner worker!

Got your check! The wives are going to have a good time this year!!

[urtoslo]

It's held on Jefferson Circuit at Summit Point. We run clockwise on Sat and counter clockwise on Sun.
Mailed my $ last week. [:>]
Yeah ... gotta watch the last turn running CCW Sunday ...
Some have overcooked it and "discovered" the rocks behind the weeds on the inside ... [:-s]

Denny, got your check too!

Now I'm only waiting for one check to go with the registration..... I wonder who that might be??? [:p]

[405LS6]

I sent my check and I can only run Saturday. Hopefully I will have my brakes fixed by then or else I'll cut a hole in the floor and use my feet!

[urtoslo]

I sent my check and I can only run Saturday. Hopefully I will have my brakes fixed by then or else I'll cut a hole in the floor and use my feet!


Got it! [B-)]

Don't worry about the brakes, they only slow you down! Oh wait, somebody already said that..... [:D]

[jbeaupre]

For all those considering Spooktacular, we had a full house last year, you need to get registrations into Andrej.

[BLKOPS]

Engine going in the Car

Check is in the mail

[wazzzup]

Engine going in the Car

Check is in the mail

Alvin! You are going for that overall jacket this year aren't you! [;)]

[BLKOPS]

Engine going in the Car

Check is in the mail

Alvin! You are going for that overall jacket this year aren't you! [;)]


I came close last year, but Dennis was just too good. At this point why not.... [:D]

[urtoslo]

Engine going in the Car

Check is in the mail

Your check came in the mail today.
[:D] [B-)]

[urtoslo]

Let's keep those registrations coming! If you need a high speed license, get with me too.

Workers, workers, workers, we need corner workers! If you can help, we also need some one to step up for timing chief. We also need a timing helper, course setup and course take down, and we could also use a trainee course marshall. In addition, we need more corner workers!

Let me know what you would like to do and I"ll put you on the list and get you trained. No job is too tough that we can't take a raw newbie and get you up to speed safely. I also guarantee that you will have a ball, not matter what you end up doing.

If you don't know what you'd like to do, just let me know and we'll get you squared away. You haven't spent a fun weekend anywhere until you've spent it working at the Spooktacular!

[wazzzup]

Andrej, I've got your check and will have it Tuesday night. [;)]

[urtoslo]

Andrej, I've got your check and will have it Tuesday night. [;)]


[B-)] [B-)] [B-)] [B-)] [B-)] [B-)] [B-)] [B-)] [B-)] [B-)] [B-)] [B-)]

[jbeaupre]

Let's keep those registrations coming! If you need a high speed license, get with me too.

Workers, workers, workers, we need corner workers! If you can help, we also need some one to step up for timing chief. We also need a timing helper, course setup and course take down, and we could also use a trainee course marshall. In addition, we need more corner workers!

Let me know what you would like to do and I"ll put you on the list and get you trained. No job is too tough that we can't take a raw newbie and get you up to speed safely. I also guarantee that you will have a ball, not matter what you end up doing.

If you don't know what you'd like to do, just let me know and we'll get you squared away. You haven't spent a fun weekend anywhere until you've spent it working at the Spooktacular!

Just to keep Spooktacular in mind! Four weeks from this Friday night we will be doing tech at Summit. Get you registrations in, workers sign up. We are looking at a great series of events for the weekend!

[provette67]

still got some room for some more.A few of us are planning on coming again this year to wear out some tires [:D]

[wazzzup]

Hey Drej! How many are we up to now? I know the cut off for the refund drawing is the 20th of the month! So let's get those registrations in folks! [;)]

[urtoslo]

I haven't counted for a couple of days... I'll check tonight and post the list here. [:D]

[urtoslo]

Paid Entrants:

Ken N
Richard O
Barb F
Joe K
Brian G
Jim R
Jack A
Mike B
Mike W
Rich S
Glenn M
Cassidy N
John F
George K
Daniel F
Denny M
Dennis D
Kienan W
Bret W
Jim B
Peter F
Galen M
Peter G
Mike E
Don S
Alvin B
Ed D

Thanks! Keep them coming! I look forward to the mail every day!

[provette67]

checks in the mail [:D]

[urtoslo]

Paid Entrants as of 9-10-07:

Ken N
Richard O
Barb F
Joe K
Brian G
Jim R
Jack A
Mike B
Mike W
Rich S
Glenn M
Cassidy N
John F
George K
Daniel F
Denny M
Dennis D
Kienan W
Bret W
Jim B
Peter F
Galen M
Peter G
Mike E
Don S
Alvin B
Ed D
Gary S
Geoffrey G
George G
Stewart F
Dick C

Thanks! And keep them coming!

[Jack and Karen]

Hey Andrej-

Jack's going to enter but I'm just gonna come down and hang out. You can put me to work wherever you need me.

Karen

[urtoslo]

Aw, come on! I thought you were going to set LFTD this year!

[Jack and Karen]

We have to pick and choose a little, with both of us running. I'm going to do Shanendoah in Oct.
Really, put me to work! Whatever you need.
Karen

[z06racing]

We have to pick and choose a little, with both of us running. I'm going to do Shanendoah in Oct.
Really, put me to work! Whatever you need.
Karen


14 worker points or 14 entrant points? And NO points on SHEN? Hmmm [:-?] C'mon Karen, you WILL be there anyways... [:p]

[janderson]

Andrej can you call me in the next few days???
My number is 404-791-3019
Pretty sure I'm comming, just need to figure out how many runs I can get in if you still need me to run timing.

Thanks!!!

[urtoslo]

James,

Timing is covered this year. Come on up and run as many autoxes as you want! If I get your registration form and payment by next Thursday, you get in the pool for a refund!

[janderson]

Check is on the way for all 14 events then!

HS license question:
I have my HS license from when I was an east region member of NCCC, I'm now a member in the SE region (NCCC number is different). Any problems or do I need to get an HS license fron the SE RCD? My current card expires 2009

Thanks!!!

[urtoslo]

James,

As long as your license has not expired, it's good!

See you at the track!

Andrej

[urtoslo]

I really enjoy coming home, opening the mail and seeing who's sent me their registrations. This is going to be a fun Spook (as usual!)

Paid Entrants as of 9-14-07:

Ken N
Richard O
Barb F
Joe K
Brian G
Jim R
Jack A
Mike B
Mike W
Rich S
Glenn M
Cassidy N
John F
George K
Daniel F
Denny M
Dennis D
Kienan W
Bret W
Jim B
Peter F
Galen M
Peter G
Mike E
Don S
Alvin B
Ed D
Gary S
Geoffrey G
George G
Stewart F
Dick C
Deb M
Dennis M
Georgana T
Jack P
Dave W
Richard M

[z06racing]

A heads up for TECH....... at the recent NCCC competition meeting it was voted on a clarification that ALL CENTER CAPS from 1984 to the present MUST BE REMOVED for SPEED EVENTS

It was argued that some you have to remove the wheel to remove the center cap and for Group one street cars without a jack that is a hassle.

However, bottom line is that it was decided they must be taken off.

SO as EVERYONE preps their car for our event, get those caps off and do NOT whine at TECH to Woodsie that you dont have a jack and they are secure and wont come off.

NO SURPRISES ok? [#-o]

[urtoslo]

Paid Entrants as of 9-17-07am:

Ken N, Richard O, Barb F, Joe K, Brian G, Jim R, Jack A, Mike B,
Mike W, Rich S, Glenn M, Cassidy N, John F, George K, Daniel F,
Denny M, Dennis D, Kienan W, Bret W, Jim B, Peter F, Galen M,
Peter G, Mike E, Don S, Alvin B, Ed D, Gary S, Geoffrey G, George G,
Stewart F, Dick C, Deb M, Dennis M, Georgana T, Jack P, Dave W,
Richard M, James A, David H, John V, Michael A, Dale C

[janderson]

A heads up for TECH....... at the recent NCCC competition meeting it was voted on a clarification that ALL CENTER CAPS from 1984 to the present MUST BE REMOVED for SPEED EVENTS

It was argued that some you have to remove the wheel to remove the center cap and for Group one street cars without a jack that is a hassle.

However, bottom line is that it was decided they must be taken off.

SO as EVERYONE preps their car for our event, get those caps off and do NOT whine at TECH to Woodsie that you dont have a jack and they are secure and wont come off.

NO SURPRISES ok? [#-o]

Well, I'm leaving the chrome Z06 wheels on for this event, good thing the center caps just pop off.

[=D>] [=D>] I made the list [=D>] [=D>]

[z06racing]

Well, I'm leaving the chrome Z06 wheels on for this event, good thing the center caps just pop off.



Thats why I gave EVERYONE a heads up Jim... see ya then! Brian

[racerboy]

Hi everybody,
I am sick to my stomach cause I don't think I can make the event this year. [:(] I have enjoyed this event and all the people since 1997 when I first came out with the old blue RP Grandsport.

I am not giving up yet and am still trying to find a replacement worker for me in Topeka so I could come.

It looks like another great turn out. I love taking the corner workers/friends for death rides at the end of the day. [>:)] [:D]

[urtoslo]

Hey Aaron,

I hope you can make it, but I understand your situation too.

[kedvesh]

Was hoping to hear on Friday if my 'Vette is going to make it out of Koons in time for Spook. (It has some RF frame issues where the upper control arm connects to the frame.)

Was hoping to get my check out for all the runs on Saturday.

Guess it'll be Monday for both.

Until then ...

[LilRedCorvette]

I love taking the corner workers/friends for death rides at the end of the day. [>:)] [:D]

We love it too, Aaron. [:))]

I am doing my damndest to get ONE vette ready for this event. Will hafta be LilRed again, the Black Turd still isn't finished...shock and surprise...

[Woods977]

Brian being tech for 12 years for the spook. It used to be held at Old Dominion Speedway. I will no longer be lead tech. Paul B. is the new tech person.

So Paul: If they have Center caps and I'm sure everyone will. I recommend you have a person at the front of the line. Telling them about the new tech decision and get them out of the line if they have center caps. The RCD will be there.

[kedvesh]

Was hoping to hear on Friday if my 'Vette is going to make it out of Koons in time for Spook. (It has some RF frame issues where the upper control arm connects to the frame.)

Was hoping to get my check out for all the runs on Saturday.

Guess it'll be Monday for both.

Until then ...
Woohoo! They promised my car would be out by the end of this week.

Reg and payment for Spook mailed this morning.

Still need my NCCC # ... I know my high-speed license is in snail mail (I think.)

Don't know what group or class I'd be. (My '02 coupe has a non-stock engine and suspension.) Can someone please advise (e-mail/reply post/PM/etc.)? Thanks!

[\:D/]

[urtoslo]

Chris,

Your HS license will be at registration at the track on Friday Sept 28. See me.

A modded 2002 could fit into Group 2H. However, a blower or coilovers puts you into Group 3MH.

What is non-stock about your engine and suspension? Do you have a roll bar and fire suit? Because if you've done enough to your engine/suspension to put you into Group 3, you'll need both of those...

[kedvesh]

Chris,

Your HS license will be at registration at the track on Friday Sept 28. See me.

A modded 2002 could fit into Group 2H. However, a blower or coilovers puts you into Group 3MH.

What is non-stock about your engine and suspension? Do you have a roll bar and fire suit? Because if you've done enough to your engine/suspension to put you into Group 3, you'll need both of those...
HSL
- Thanks!

Car
- Engine: 383 stroker (NA; incl. cold air intake, ported TB, long tube headers, high flow cats, aftermarket mufflers), dyno tuned @ 479 rwHP
- Suspension: Non-stock, but conventional (VB&P leaf springs & Bilstein shocks, no coil-overs)
- Safety: Helmet (of course); neck brace/cushion (no HANS); driving gloves (fire retardent); stock seat belts & seats; bolted in harness bar; mounted fire extinguisher; no roll bar or fire suit
- Dare I say Group 2H? [:-/]

Oh yeah. This being my first Spook (not first event @ Summit Point), are there pre-event tech forms I need to have filled out prior to showing up? (I might have missed the forms on the Spook site or somewhere else.) Or, is it on us to make sure things are correct in order to pass through tech at the track?

[z06racing]

A modded 2002 could fit into Group 2H. However, a blower or coilovers puts you into Group 3MH...


Even tho I read the next post on his mods Andrej.....Current rulebook page 2-36 slots BLOWERS & SC into RP or RPAF ... not 3MH... FWIW [:D]

I will no longer be lead tech. Paul B. is the new tech person.

WOODSIE... guess all those years of getting beaten up to gauge wheel studs exhaust pipes has taken its toll. [:))] [:))] Who you gonna argue with now? See ya !

[Black396]

Car
- Engine: 383 stroker (NA; incl. cold air intake, ported TB, long tube headers, high flow cats, aftermarket mufflers), dyno tuned @ 479 rwHP


Stroker --- LS6 383 --- Group III - RollBar and FireSuit

[z06racing]

Car
- Engine: 383 stroker (NA; incl. cold air intake, ported TB, long tube headers, high flow cats, aftermarket mufflers), dyno tuned @ 479 rwHP


Stroker --- LS6 383 --- Group III - RollBar and FireSuit


WHAT HE SAID [#-o] ----thanks MIKE.... Guess I slid sideways in turn one and forgot to throw that in my other post. Gotta love another III-MH car! [>:D<]

[urtoslo]

Chris, looks like you need a rollbar and fire suit to run Spook. You have made yourself such a scary fast car that you need additional SAFETY ITEMS!!!!! before you can play with us. As much as we like to go fast, we have to be safe first.

Sorry, dude.... [:(]

[kedvesh]

Chris, looks like you need a rollbar and fire suit to run Spook. You have made yourself such a scary fast car that you need additional SAFETY ITEMS!!!!! before you can play with us. As much as we like to go fast, we have to be safe first.

Sorry, dude.... [:(]
I think a roll bar install will take a bit more planning. Oh well. [:(] Just rip up my application and check when you get it.

I'll come up that Saturday and corner work or whatever if you need some help. Or...I can run with my 100% stock/street Honda Accord LX [;)] But, that would be a bit unreal! [:p]

[jbeaupre]

Use this link to get your registration form!

http://www.nvcorvetteclub.com/nvcc/spook/index.jsp

Workers, please notify me of your availability! Corner workers, specialty chiefs, CALL ME CALL ME CALL ME!

JUST TO GET THIS LINK BACK ON TRACK! We are always looking fo r more entrants and workers, please let Andrej know.
Countdown: 12 DAYS TO 14th SPOOKTACULAR !!!!

[urtoslo]

Chris, looks like you need a rollbar and fire suit to run Spook. You have made yourself such a scary fast car that you need additional SAFETY ITEMS!!!!! before you can play with us. As much as we like to go fast, we have to be safe first.

Sorry, dude.... [:(]

I think a roll bar install will take a bit more planning. Oh well. [:(] Just rip up my application and check when you get it.

I'll come up that Saturday and corner work or whatever if you need some help. Or...I can run with my 100% stock/street Honda Accord LX [;)] But, that would be a bit unreal! [:p]

Well, we could always use more corner workers.

Why don't you give Piper Motorsports a call? They're in Sterling and may be able to hook you up with a roll bar before Spook. A driving suit can be picked up at OG Racing, also in Sterling.

The roll bar will also allow you to add harnesses. Those are a significant improvement for the driver!

A Honda, huh? We had a dude a couple years ago that ran his Honda with us and had a blast.

Let me know what you want to do

[kedvesh]

Chris, looks like you need a rollbar and fire suit to run Spook. You have made yourself such a scary fast car that you need additional SAFETY ITEMS!!!!! before you can play with us. As much as we like to go fast, we have to be safe first.

Sorry, dude.... [:(]

I think a roll bar install will take a bit more planning. Oh well. [:(] Just rip up my application and check when you get it.

I'll come up that Saturday and corner work or whatever if you need some help. Or...I can run with my 100% stock/street Honda Accord LX [;)] But, that would be a bit unreal! [:p]

Well, we could always use more corner workers.

Why don't you give Piper Motorsports a call? They're in Sterling and may be able to hook you up with a roll bar before Spook. A driving suit can be picked up at OG Racing, also in Sterling.

The roll bar will also allow you to add harnesses. Those are a significant improvement for the driver!

A Honda, huh? We had a dude a couple years ago that ran his Honda with us and had a blast.

Let me know what you want to do
Thanks for the ideas. I dropped a line to Piper about costs, etc. Didn't know they were out near OG Racing and IAD.

I was partly joking about running my Honda. I'm not sure I'd want to kill the auto tranny. I'd probably rent a car from the airport and and trash it before my Honda.

To be honest, if I can't run the 'Vette, I can come up on Sat and be a corner worker or do registration, etc. I'll let you know.

[urtoslo]

To be honest, if I can't run the 'Vette, I can come up on Sat and be a corner worker or do registration, etc. I'll let you know.

OK, I understand how you feel. Let me know what you decide.

[z06racing]

To be honest, if I can't run the 'Vette, I can come up on Sat and be a corner worker or do registration, etc. I'll let you know.

Ahhhhhhh there goes that III-MH car [:((] [:((]

[wazzzup]

Don't worry Brian. I'm IIIMH also. So you won't be alone buddy! [;)]

[kedvesh]

Don't worry Brian. I'm IIIMH also. So you won't be alone buddy! [;)]
Where did you guys have your roll bars made/installed?

[z06racing]

Don't worry Brian. I'm IIIMH also. So you won't be alone buddy! [;)]
Where did you guys have your roll bars made/installed?

CHRIS mine is a DOUG RIPPIE (DRM) bar. It comes raw steel and I had it powder coated and then welded to my frame.... All of which takes time which you are not gonna have.

See where George got his from... then make a decision...the fire suit is a non issue for you... one phone call and its on your front porch.

[LilRedCorvette]

...the fire suit is a non issue for you... one phone call and its on your front porch.

Check out the clearance sales OG Racing has. I found mine there, got it for around $500, was originally close to $1K. 3-layer fire suit (great for those cold mornings), current date, just was a discontinued style. It helped that it was an odd size, too.

www.ogracing.com They're local, you can try them on there, or have it shipped.

[racerboy]

Andrej,

Check is in the mail! [:D] I was able to get away from Topeka for the weekend.

[urtoslo]

Great! Glad you could make it!

[Woods977]

Don't worry Brian. I'm IIIMH also. So you won't be alone buddy! [;)]
Where did you guys have your roll bars made/installed?


Call Piper motorsports today ask for Mitch or Robby.


Phone: (703) 996-0353

[kedvesh]

Robby @ Piper gave me a quote ($$$$; w/ harnesses). Don't think it can be done in time for Spook.

Depending on what I find on the NVCC site, I may start a separate discussion thread on the merits of stock vs. harness bars vs. roll bars vs. roll cages. There's certainly a lot of opinion about the four on sites such as CorvetteForum.com, etc.

Andrej, I'll PM ya.

And now, back to your regularly scheduled Spook channel! [:D]

[wazzzup]

Robby @ Piper gave me a quote ($$$$; w/ harnesses). Don't think it can be done in time for Spook.

Depending on what I find on the NVCC site, I may start a separate discussion thread on the merits of stock vs. harness bars vs. roll bars vs. roll cages. There's certainly a lot of opinion about the four on sites such as CorvetteForum.com, etc.

Andrej, I'll PM ya.

And now, back to your regularly scheduled Spook channel! [:D]

Chris,

A couple of things to chew on for you.
1. With the amount of track days you are doing and the speeds you are running STAY AWAY! and I say STAY AWAY from harness bars!!! I can't stress that enough to you buddy!!! If you roll that car and the top comes in, guess what is going to be the main point of impact when you can't duck because you are strapped in with harnesses! YOUR NECK!!!

2. Also, if you can wait on them Piper is the best in the area. He really knows what he is doing and does a class A job on everything he touches.

George

[kedvesh]

Robby @ Piper gave me a quote ($$$$; w/ harnesses). Don't think it can be done in time for Spook.

Depending on what I find on the NVCC site, I may start a separate discussion thread on the merits of stock vs. harness bars vs. roll bars vs. roll cages. There's certainly a lot of opinion about the four on sites such as CorvetteForum.com, etc.

Andrej, I'll PM ya.

And now, back to your regularly scheduled Spook channel! [:D]

Chris,

A couple of things to chew on for you.
1. With the amount of track days you are doing and the speeds you are running STAY AWAY! and I say STAY AWAY from harness bars!!! I can't stress that enough to you buddy!!! If you roll that car and the top comes in, guess what is going to be the main point of impact when you can't duck because you are strapped in with harnesses! YOUR NECK!!!

2. Also, if you can wait on them Piper is the best in the area. He really knows what he is doing and does a class A job on everything he touches.

George
Yep. That's kind of the line I started thinking based upon all the postings here and on other sites. Crashes such as whomever's end-over-end happening in front of me in a '04 CEZ06 on the Jefferson Circuit at the NVCC HPDE back in Dec '05 also put it into perspective a bit more.

BTW, I posted my concerns over on a 'reopened' NVCC thread, Re: Question for discussion - Seat Belts or Harness (http://www.nvcorvetteclub.com/mvnforum/mvnforum/viewthread?thread=2094&offset=30#23000)

[MoreGo]

Then again, HPDE's - if that's you main focus, is not exactly door to door racing.

{The ZO6 already had a built in roll bar. Many Pro's entering World and National competition actually cut it out to save on weight while they also install full cages.}

In an HPDE, you’re more likely to injure your neck in say - a head on collision - such as a wall or even sliding in sideways into a wall or stationary object. In this case a roll bar is a nice to have - but it's your "neck" that will have to be the main point of concern. Five and Six point harnesses are necessary - but a critical safety tool most people would want is a Hans device. They are more expensive then most roll bars purchased on the web [and a big reason why you don't see people wearing them]. But - then what’s the price of a neck injury? Aside from a Hans the next thing to consider is door protection. A driver's side window net also helps.

I'll probably get a lot Bashing for saying this b/c several guys running in HPDE's at NVCC have roll bars and all of us are rather opinionated [some more than others] - and I think that's great. It's not like there has never been a roll over in an HPDE - b/c there has. Hell, there have been roll over’s going 25 mph in autocross.

In my opinion [and Miriam will back me up on this b/c its what she preaches in class at every HPDE I have attended where she is instructing] if you are going to install a roll bar b/c you want to protect you noggin in the event of a roll over - you might as well go all the way and install a full cage. It's great that your head will have less of chance of getting pushed down into your chest - but then where does your face go when the windshield comes smashing in as part of the roll?


All I'm saying is that "IF" HPDE is the prime focus - as opposed to door to door racing - I think there should be at least - if not more -consideration given to what [in my opinion] is more likely to happen and as a result - ones neck needs to be protected - regardless of the price.

[MungoZ06]

OK ... I'll accept the DumbA$$ award!
IIRC ... and at my age that's iffy ... we pulled down tech forms and filled them out ahead of time in previous years ...
Not so?
If so ... where is the form?
TIA
Denny

[LilRedCorvette]

OK ... I'll accept the DumbA$$ award!
IIRC ... and at my age that's iffy ... we pulled down tech forms and filled them out ahead of time in previous years ...
Not so?
If so ... where is the form?
TIA
Denny

Tech sheet can be found here: http://www.nvcorvetteclub.com/nvcc/hpde/index.jsp

Safety equipment debate can continue here:
http://www.nvcorvetteclub.com/mvnforum/mvnforum/viewthread?thread=2094

[urtoslo]

Paid Entrants as of 9-19-07pm:

Ken N, Richard O, Barb F, Joe K, Brian G, Jim R, Jack A, Mike B,
Mike W, Rich S, Glenn M, Cassidy N, John F, George K, Daniel F,
Denny M, Dennis D, Kienan W, Bret W, Jim B, Peter F, Galen M,
Peter G, Mike E, Don S, Alvin B, Ed D, Gary S, Geoffrey G, George G,
Stewart F, Dick C, Deb M, Dennis M, Georgana T, Jack P, Dave W,
Richard M, James A, David H, John V, Michael A, Dale C, Jeff H, Thomas R, Rob O

Chris S, I got yours too, but I'm holding it till I hear on what you end up doing...

[urtoslo]

OK ... I'll accept the DumbA$$ award!
IIRC ... and at my age that's iffy ... we pulled down tech forms and filled them out ahead of time in previous years ...
Not so?
If so ... where is the form?
TIA
Denny


Denny,

I've modified the Spook event on this website. Pick up your tech form (NCCC form available on the ERNCCC website too), lunch request and car number at registration at the track. Bring your HS license and state drivers license. Don't forget to sign the waiver!

[urtoslo]

Paid Entrants as of 9-21-07am:

Ken N, Richard O, Barb F, Joe K, Brian G, Jim R, Jack A, Mike B,
Mike W, Rich S, Glenn M, Cassidy N, John F, George K, Daniel F,
Denny M, Dennis D, Kienan W, Bret W, Jim B, Peter F, Galen M,
Peter G, Mike E, Don S, Alvin B, Ed D, Gary S, Geoffrey G, George G,
Stewart F, Dick C, Deb M, Dennis M, Georgana T, Jack P, Dave W,
Richard M, James A, David H, John V, Michael A, Dale C, Jeff H, Thomas R, Rob O, Rich M

[jbeaupre]

EIGHT DAYS UNTIL SPOOK!

[urtoslo]

Paid Entrants as of 9-21-07pm:

Ken N, Richard O, Barb F, Joe K, Brian G, Jim R, Jack A, Mike B,
Mike W, Rich S, Glenn M, Cassidy N, John F, George K, Daniel F,
Denny M, Dennis D, Kienan W, Bret W, Jim B, Peter F, Galen M,
Peter G, Mike E, Don S, Alvin B, Ed D, Gary S, Geoffrey G, George G,
Stewart F, Dick C, Deb M, Dennis M, Georgana T, Jack P, Dave W,
Richard M, James A, David H, John V, Michael A, Dale C, Jeff H, Thomas R, Rob O, Rich M. Aaron Q, Dick C

Thanks to all those that have registered!

Keep them coming!

[jbeaupre]

FIVE DAYS TO SPOOK!
WEATHER OUTLOOK FOR SUMMIT POINT FOR THIS COMING WEEKEND: SPOOKTACULAR!!! [:D]

COME ON OUT FOR A GOOD TIME!

[urtoslo]

Thanks, Jim.

FYI we've got about 12 driver spots left... [B-)]

[C4B4the04]

Bad weather sure didn't keep speeds down last year on Sunday!
:)

Really getting excited now...I thought I would be ok until Friday but man o man do I want this week to wrap up...and its only Tuesday!

Cassidy

[wazzzup]

Hey Cassidy! We're going to start calling you SMOKE! [:))]

[jbeaupre]

THREE Days to SPOOK! Weather forecast holding to be in the 70's (meens no baking on the corners hopefully) and DRY!

[wazzzup]

Got new rubbers on my baby and ready to roll!!! [;)] I'm not running with 3 year old tires this year! Hope to just drop some time off this year! [B-)]

[casper]

ALL THE BEST TO EVERYONE OUT THERE THIS WEEKEND, HAVE FUN AND BE SAFE! Can't wait to hear / see a thread from the weekend.

I have this sudden urge to start drawing up the score board, putting together the list of entrants / markers / tape / packing a bag with by boots / hat / beer etc.

Miss you guys! Have fun!

[urtoslo]

Hey, we miss you too!

[z06racing]

Got new rubbers on my baby


WAY TOO MUCH INFORMATION MAN!

[z06racing]

AND one more FOOTNOTE: All 1984 and newer cars coming out to play.... I said this before in another thread somewhere...ALL CENTER CAPS WILL BE REMOVED PRIOR TO TECH---------------- or you will not run. PERIOD. No surprises..... no excuses..... no exceptions.....ROGER THAT? [B-)]

[wazzzup]

AND one more FOOTNOTE: All 1984 and newer cars coming out to play.... I said this before in another thread somewhere...ALL CENTER CAPS WILL BE REMOVED PRIOR TO TECH---------------- or you will not run. PERIOD. No surprises..... no excuses..... no exceptions.....ROGER THAT? [B-)]


That was mentioned at the meeting on Tuesday and will be looked for at tech. [;)]

[wazzzup]

Got new rubbers on my baby


WAY TOO MUCH INFORMATION MAN!

Yep! And she just got a new synthetic lube job too!!! [:))] [:))] [:))] [:))]

[janderson]

New Fuel pump in, new fuel filter on, coolant drained last night, new thermostat in.
Filling up the coolant tonight, packing and then I'll see ya'll Friday evening sometime.

Friday activities are at Jefferson, not the roach motel?

[urtoslo]

Friday activities are at Jefferson, not the roach motel?

Yup, we'll be there starting around 5pm.

Drive safe!

[racerboy]

Thanks for the info, I talked to Mike Geyer today and he said tech was at the track Friday and I thought that was wrong after all the years it was at the hotel.

Thanks for clearing that up!

The Tiretown crew is leaving around noon and should be there by 6 PM for some COLD beverages. [:D]

Can't wait to see everybody again. [=D>]

[urtoslo]

Thanks for the info, I talked to Mike Geyer today and he said tech was at the track Friday and I thought that was wrong after all the years it was at the hotel.

Thanks for clearing that up!

The Tiretown crew is leaving around noon and should be there by 6 PM for some COLD beverages. [:D]

Can't wait to see everybody again. [=D>]

I couldn't get any hotel to give me a price for 30 rooms.... [:((]

So it's all at the track this year.

We will have the beverages waiting for you. Drive safe!